Altera Cyclone Board EP4CE10F17C8N EP4CE10 ALTERA Cyclone IV FPGA Development Evaluation Core Board

Altera Cyclone Board EP4CE10F17C8N EP4CE10 ALTERA Cyclone IV FPGA Development Evaluation Core Board
  • Продавецpersonalloansonline.us
  • Список ценUS $34.19piece
  • Продажная ценаUS $34.19piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,1 (131)

Oписание продукта

Waveshare EP4CE10 EP4CE10F17C8N ALTERA Cyclone IV FPGA Development Board + 19 Accessory Modules Kits = OpenEP4CE10-C Package B

 

FPGA development board designed for ALTERA Cyclone IV series, features the EP4CE10 onboard, and integrates various standard interfaces, pretty easy for peripheral expansions.

Overview

OpenEP4CE10-C is an FPGA development board that consists of the mother board DVK600 and the FPGA core board CoreEP4CE10.

OpenEP4CE10-C supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with ALTERA Cyclone IV series FPGA devices. OpenEP4CE10-C enables you to start your design with the Nios II processor easily and quickly.

 

What\'s on the mother board

  1. FPGA CPLD core board connector: for easily connecting core boards which integrate an FPGA CPLD chip onboard
  2. 8I/Os_1 interface, for connecting accessory boards/modules
  3. 8I/Os_2 interface, for connecting accessory boards/modules
  4. 16I/Os_1 interface, for connecting accessory boards/modules
  5. 16I/Os_2 interface, for connecting accessory boards/modules
  6. 32I/Os_1 interface, for connecting accessory boards/modules
  7. 32I/Os_2 interface, for connecting accessory boards/modules
  8. 32I/Os_3 interface, for connecting accessory boards/modules

All the I/O interfaces above:

  • capable of being simulated as USART, I2C, SPI, PS/2, etc.
  • capable of driving devices such as FRAM, FLASH, USB, Ethernet, etc.
       9.   SDRAM interface
  • for connecting SDRAM accessory board
  • also works as FPGA CPLD pins expansion connectors
     10.  LCD interface, for connecting LCD22, LCD12864, LCD1602
     11.  ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.
     12.  5V DC jack
     13.  Joystick: five positions
     14.  Buzzer
     15.  Potentiometer: for LCD22 backlight adjustment, or LCD12864, LCD1602 contrast adjustment
     16.  Power switch
     17.  Buzzer jumper
     18.  ONE-WIRE jumper
     19.  Joystick jumper
 

For jumpers 17-19:

  • short the jumper to connect to I/Os used in example code
  • open the jumper to connect to other custom pins via jumper wires

The DVK600 supports a wide range of different core boards, therefore, some of the interfaces may be Not-Connected and useless while connecting to certain core board.

What\'s on the CoreEP4CE10

 

  1. EP4CE10F17C8N: the ALTERA Cyclone IV FPGA device which features:
    • Operating Frequency: 50MHz
    • Operating Voltage: 1.15V~3.465V
    • Package: BGA256
    • I/Os: 164
    • LEs: 10K
    • RAM: 414kb
    • PLLs: 2
    • Debugging/Programming: supports JTAG
  2. AMS1117-3.3 (on bottom side), 3.3V voltage regulator
  3. AMS1117-2.5 (on bottom side), 2.5V voltage regulator
  4. AMS1117-1.2 (on bottom side), 1.2V voltage regulator
  5. EPCS16, onboard serial FLASH memory, for storing code
  6. Power indicator
  7. LEDs
  8. Reset button
  9. nCONFIG button: for re-configuring the FPGA chip, the equivalent of power reseting
  10. 50M active crystal
  11. JTAG interface: for debugging/programming
  12. FPGA pins expander, VCC, GND and all the I/O ports are accessible on expansion connectors for further expansion

Photos

Note: The OpenEP4CE10-C does NOT integrate any programming/debugging function, a programmer/debugger is required.

Examples

 

The OpenEP4CE10-C FPGA development board comes with various examples codes for the supported peripherals, which give you a quick start to develop your own application.

Debugging/Programming Interface

The OpenEP4CE10-C FPGA development board integrates JTAG interface for programming/debugging.

 

JTAG Signal Names & Description

JTAG Header Pinout

 

Development Resources

 

The User Guide CD includes development resources listed as follow:

  • Related Software (Quaters II, NIOS II etc.)
  • Demo Code (Verilog, VHDL and NIOS II C)
  • Schematic (PDF)
  • FPGA Development Documentations (Datasheets etc.)

 

 

Package Contains

The "Standard Package" and "Accessory Boards Package" below are included.

 

Standard Package

  1. OpenEP4CE10-C development board x 1
  2. 4-pin wire x 2
  3. 2-pin wire x 2
  4. USB power cable x 1
  5. User guide CD x 1

 

Accessory Boards Package

  1. 3.2inch 320x240 Touch LCD (B) x 1
  2. 3.2inch LCD Adapter (B) x 1
  3. VGA PS2 Board x 1
  4. PL2303 USB UART Board (mini) x 1
  5. NorFlash Board (B) x 1
  6. SDRAM Board (B) x 1
  7. Micro SD Storage Board x 1
  8. AT45DBXX DataFlash Board x 1
  9. FM24CLXX FRAM Board x 1
  10. CY7C68013A USB Board (mini) x 1
  11. ENC28J60 Ethernet Board x 1
  12. PCF8563 RTC Board x 1
  13. DS18B20 x 1
  14. LCD12864 (3.3V Blue Backlight) x 1
  15. LCD1602 (3.3V Blue Backlight) x 1
  16. FT245 USB FIFO Board (mini) x 1
  17. 8 SEG LED Board x 1
  18. 8 Push Buttons x 1
  19. 4x4 Keypad x 1
  20. USB type A plug to mini-B plug cable x 1

 

 

Terms & Conditions

1. Payment:

    * We accept Escrow as the payment method. Currently, you can pay by Visa, MasterCard and bank transfer. For more information about making payment, please go to \'Escrow FAQ\' to get more details.  http://escrow.aliexpress.com/escrow-faq/payment/what-payment-methods-can-i-use.html
 
2. Shipping:

     * We ship items to Worldwide!
     * Please make sure that your shipping address is 100% correct.
     * All items will be shipped within 48 working hours on receipt of cleared payment.
     * We\'ll add a tracking number after sending the item so that you can track your parcel.
 
3. Returns Policy:

    * We are happy to return any unused item in its original packaging within 14 days of delivery.
    * Buyers are responsible for the round(two-way) shipping cost.
 
4. Feedback:

    * We\'ll leave POSITIVE FEEDBACK on receipt of cleared payment.
    * If you\'re satisfied with the item and our service, please leave POSITIVE FEEDBACK, it\'s important to us.
    * Once any problems occured, please contact us first. We\'ll try our best to work things out.
 
Please feel free to contact us for any questions, on Trademanager, or send a message to me. If you need to adjust the total price, please contact us in advance. It\'s our pleasure to serve you! We appreciate your business!!